Iphone 7 home button replacement

IPhone 7 is one the best iPhone models. It consists of all those features that will make your life more interesting. The most important part of the iPhone 7 is its home button. With the home button, you are unable to operate your iPhone 7. It also has touch id sensor that keeps your iPhone 7 save. But if your iPhone 7 home button is not woking properly and is damaged due to some mishap then don`t panic. We provide you some methods through which you can easily replace your iPhone 7 home button at home.

IPHONE 7 HOME BUTTON REPLACEMENT AT HOME:

THINGS YOU NEED FOR IPHONE 7 HOME BUTTON REPLACEMENT:

When you are going to replace home button of iPhone 7 at home then you should have these things:

• Pentalobe screwdriver

• Suction cup

• Spudger tool

• Tweezer

• IPhone 7 home button

• IPhone 7 home  button gasket

• Tri-point Y000 screwdriver bit

• New iPhone 7 home button

Steps to follow:

Removing the display screen from the body:

1. Power off your iPhone 7.

2. Then place the suction cup on the screen and pull it upward carefully in order to release the screen from the bottom of the body.

3. Now use the pointed side of the spudger tool and try to loosen the screen from the bottom of the iPhone 7.

4. Then slight the inserted flat end of the spudger tool to widen the gap between the display screen and the body of iPhone 7.

5. Again slight the spudger toll at the left and right side of the screen to open the screen from all the sides.

6. After doing this pull the suction cup to open the screen accurately.

7. Remove the suction cup.

8. Now further insert the opening pick at the place of spudger tool to break all the remaining adhesive completely.

9. Now open the display screen from the left hand side as you open the cover of your iPhone

10. Now remove the four tri-point Y000 screws that are placed on the bracket of the lower connector by using a tri-point Y000 screwdriver.

11. Remove that bracket and place it safely aside.

12. Now use the pointed side of the spudger tool to lift the battery connect out from its housing on the logic board.

13. By using the finger nail or the pointed side of the spudger tool pull the two lower display connector from the logic board.

14. Now by using the Philips #000 screwdriver remove the two screws that are placed on the bracket of front panel sensor assembly connector.

15. Remove the bracket.

16. Remove the front panel sensor assembly connector from the logic board.

Home button or touch id sensor replacement:

1. Now remove the four screws that are placed on the bracket of the home button by using the Y000 screwdriver.

2. Remove the bracket.

3. Now place the spudger tool`s flat end at the left corner side of the cable connector and pull it from its socket.

4. Similarly, pull up the underlying connector and disconnect it from the home button or touch id sensor.

5. Now remove all the adhesive that connects the touch id sensor cable to back side of the display panel by using the opening pick.

6. Now the last step is to remove the touch id sensor from the front side of the display screen and placed the new touch id sensor or home button to the display panel of the iPhone 7.

How to reassemble?

For reassemble repeat the above process in reverse order and attach all the parts and screws to the iPhone 7 back in order to use it as before.

SMART FIX OFFERS IPHONE 7 HOME BUTTON REPLACEMENT AT HOME:

Now you don`t need to go here and there to get your iPhone 7 home button replacement. Smart Fix provides their best services at your place. No matter what, you are in the office or at your home we provide you with the best services there. You only need to tell us about your device and their issues. We promised to fix all your problems at your doorstep. We know you are in hurry and we will understand it. Our technicians are expert and tried their best to replace your iPhone 7 home button on spot. Our technicians never carry your iPhone with them, they have all the equipment with them and replace your iPhone 7`s home button wherever you want. Our technicians only take 60 minutes for replacing and then the phone is ready to use.  We have monitored and centralized GPS system, so you can easily trust our services and our technicians. Our services are free from any harm or fraud. The Smart fix is also considered as a trusted services provider in New York.

We allow you to pay through credit or debit cards. You can pay with cash as well. One of the great policy of our services is that you don`t have to pay any advance. Once your iPhone 7 home button is replaced and you are satisfied with our services then you will pay.