As we know the technology spread in the world day by day. When we talk about computer, then in early ages the size of the computer is very large and it requires a lot of power and occupied a large space due to which people can`t afford to buy those massive computers. But in every generation, the size of the computer is decreased and the last stage is when it fix on the small table easily. But it is not the end. After the computer, the tablets also introduced by the technology. These tablets are easily portable than the computer. While working on the computers there are the restrictions that you can`t move here and there where as in tablets you can easily work anywhere you want. Tablet is basically like a mini portable computer. You can do all the work easily on that small screen. You cannot only use it for working purpose, but you can do also anything you want.
Like mobile phones, tablets are also come in different brands and sizes and having different operating systems. Some tablets are based on an android operating system that is launched by familiar brands like Samsung and many other local brands. Another type of tablets that have an osi operating system that is launched by Apple is called iPad.
Apple`s iPads are a little bit expensive but they are worth buying. Its operating system is very fast and the battery timing is last longer. There are many different categories in ipads. Ipad mini 3 is one of them. This iPad is easily portable and provide satisfaction related to its performance. But what if your iPad mini 3 is fallen from your hands and its camera is damaged? Camera is the most important part of the device. You don`t only use it to take your pictures but also used for video calls, sending documents etc. hence you need to repair it. Companies that repair iPad camera, charged a huge amount of money and take a lot of time in repairing. So we come up with the method through which you can easily repair iPad mini 3 camera at home.
Following are the few steps through which you can easily replace the iPad mini 3 camera at home:
iPad mini 3 new camera
iPad mini 3 digitizer cable
Place the suction cup on the display screen.
Make sure that the suction cup is fully placed on the screen that it stick to it tightly.
Now hold the screen from one hand and then pull the suction cup slightly in order to lift the display screen up from the body of iPad.
Now hold the suction cup and slide the opening pick between the gaps.
Remove the suction cup.
Now take the second opening pick and place it beside the first opening pick. You do this to remove the adhesive.
Now slide the second opening pick downwards to remove the adhesive and similarly slide the first opening pick upward.
If the opening pick is blocked by the adhesive then roll the opening pick in order to continue the process.
While sliding the opening pick move it towards the top left side of the iPad mini 3 so that you can also remove the adhesive of that side.
As the front camera is also located at the top of the iPad mini 3 so stop sliding the opening pick as you reached the camera. Then slide the opening pick carefully above the camera without damaging it further.
Like this, slide the opening pick to all the four sides of the iPad mini 3 to remove the adhesive that connects the body and the screen together.
Placed the opening pick at the four corners so that the screen cannot stick back to the body.
Along with the safety of the camera, also keep in mind that there are also some components that are placed at the bottom side of the iPad mini 3 like antennas, digitizer cable and home button cavity. Slide the opening pick in such a manner that you these components are not damaged.
At the upper corner, you placed the opening picks before, try to twist those opening pick so that the screen is lifted up slightly.
By doing this when all the adhesives are removed then open the display screen like the notebook.
The housing of the front camera is stick on the display screen so remove it from the screen and placed it back on the camera to protect it from any further damage.
Now remove the piece of foam that is placed on the top and bottom right sides screws that protects the LCD.
Also, remove the tape that is placed on the top of the left side LCD screws.
You can remove the foam and tape with the help of the tweezer.
Remove the four screws that are placed at the four corners of the LCD by using the Phillips screwdriver.
LCD is connected to the speakers by a tape. Use the tweezers to remove that tape.
Again by using the tweezer also remove the foam tape from the top that covers the LCD.
Now place the spudger tool between the tape and the screen in order to detach the LCD and tape.
Place the guitar pick between the LCD and the body of the iPad mini 3 from the left corner.
Repeating the above step on the right side.
Now remove the adhesive between the LCD and black metal plate by placing the spudger tool between them.
Repeat the above step on the top.
Then place the spudger tool between the LCD and the shield plate and remove the adhesive by sliding it gently.
When the LCD is free from adhesive then lift it up to make sure that all the adhesives are removed accurately.
Now place the spudger tool between the speaker and the tape.
Separate the tape from the left speaker by rotating the spudger tool along with pulling the LCD apart.
Doing the same thing with the right side of the speaker.
Remove the 16 screws that are placed on the left and right side of the LCD shield plate by using Phillips screwdriver.
From the top side of the LCD shield place the spudger tool starting from the bottom.
Slide the spudger tool to remove the shield plate from the body of the iPad mini 3.
Now LCD shield plate is easily removed from the body of the iPad mini 3.
Connector shield is attached to the logic board by the three Phillips screws, open those screws.
Remove that shield by the help of tweezer.
Now pull the battery connector upward with the help of the plastic opening tool.
Like this pull the LCD connector from the logic board.
Now place the spudger between the LCD at the right side of the iPad mini 3.
After sliding the spudger tool the tape is removed and the LCD is needed to be pulled up.
Doing the same procedure on the left side.
Now you can easily remove the LCD from the iPad mini 3.
Now remove the digitizer connector from the logic board by using the opening tool.
Now separate the front panel from the iPad mini 3.
Now with the help of the pointed side of the spudger tool try to remove the tape that covers the metal bracket that is placed on the right side.
For further removing the tape completely use the tweezer.
Now push the metal bracket to the left side by using the plastic opening tool.
Then pull up the lower side of the bracket by the use of pointed side of the spudger tool that is its tip.
Take out the metal bracket from the iPad mini 3 with the tweezer.
There is the ribbon cable connector that is placed at the top right side, remove it from the front facing camera by using opening tool of plastic.
Now pull out the front camera connector from its socket.
Now take out the damaged camera from its housing by using the pointed side of the plastic opening tool under the metal bezel that is on the front camera.
Now you can place the new camera at the place of the old damaged one.
Repeat the above procedure in reverse order so that you can fix the display screen and camera back to the body of the iPad mini 3.
But if you fail to replace the camera at home after doing the above process then what to do?
Don`t worry Smart fix is here to help you in these conditions.
Smart Fix will provide you all their best services at your doorstep. Wherever you are our experts reach your place whether it is your home or working place, we will provide you our high quality services without wasting your time. As our company has a good name in providing the best services to their clients in New York.
We provide you with a great convenience. You don`t need to go to any shop to get your iPad repair. You just contact us and tell us about your devices and the issues that it has. Our technicians will come to your home and fix all the problems on your device. Our technicians are expert and devoted to their work. They are trained and able to repair your device in less time. We know that you have a lot of work and half of your work is connected with the mobile phones. We totally understand your situation and according to it, we will provide quick services. One main thing our technician cannot carry your iPad with them, they will repair it at your desired place. Your device is ready in useful condition within 60 minutes for sure.
Our technicians are expert in repairing all the issues of your device. If the screen of your iPad is damaged or the camera is not working properly or the touch system is not responding, etc.., hence we can repair all the issues of your mobile. All the materials and equipment used in repairing your iPad is of high quality. So you don`t need to worry about our services. We guarantee to provide you all the best services from our side.
We provide you all the repairing services at such a low price that easily suits your pockets. We make the payment procedure easy for you. If you don`t carry a cash with you then you can also pay us with credit or debit cards. We will never demand any advance payment. Once your iPad is repaired and you are satisfied with our services then you will pay to us.
You cannot trust everyone easily. As we provide you services at your home so if you have any trust issues than don`t worry. We have monitored and GPS centralized system, therefore you can trust our workers easily.
Our services are always available for you at any time. Whatever the time is, you just make a single call and our technicians will be at your door step. Once you avail our services and show your trust in us then I guarantee you will also like our services